Product details ：

TECHANGE series of intelligent magnetic flow meter is a high performance, high reliability flowmeter for measuring the volumetric flow of conductive liquids and slurries in closed conduits.
　　Widely used in iron and steel, electric power, petroleum, chemical, industry, coal, metallurgy, Papermaking, water supply and drainage, food, medicine and other industries.


Application
Electromagnetic flow meter & Vertex flow meter are used to measure the volumetric flow of conductive liquid and slurry in closed pipelines. It is suitable for chemical, electric power, metallurgy, petroleum, water supply and drainage, papermaking, medicine, food and other departments



Features:
1.There is no movable part in the pipes ,hence ,nothing resista the flow and to cause pressure loss or jamming.
2.Measurement is free from series of influences e.g medium density, elasticity ,temperature or electrical conductivity.
3. Corrosion resistance and wearability standard among other indexes are met via selecting different materials for lining and electrodes
4 .The products are equipped with high resoluction backlighted LCD display, which is integrated with menus with both language of english and chinese, it is up to the users' needs to modify the measuring range on site.
5.The devices have also been integrated with series of communiction prorocals i.e.RS485. RS232 ,HART and MODBUS.
6.With programmable low frequency rectangular wave excitation, flow stability is promoted on less power loss.
7. Both power off protection and overrang alarming orients for measured calue, besides,it is also possible to change medium flow direction via programming the integrated sensor, which means installation of sensors are not limited to flow direction and messuring is operatable with both the flow directions.
MODEL SELECTION:
LUGB Vertex flowmeter Model Selection:

Product Name	Tri clamp Sanitary  Beer Milk Electromagnetic Flow Meter	Nominal diameter	DN10-DN2000
Medium conductivity	≥5us/cm	Accuracy	0.1%,0.5%
Flow rate rang	0.5-10m/s	Communication	RS485(Modbus),HART
Medium temperature	≤100℃	Load Resistance	4-20mA is 0-750Ω
Ambient temperature	Sensor:-40℃-+80℃ Converter:-15℃-+50℃	Lining material	PTFE,F46,Hard rubber,PFA
Pressure Level	PN1.6MPa or customized	Electrode material	316L,Hastelloy B, Hastelloy C,Ti
Shell material	stainless steel, carbon steel	Installation form	Compact type ,Remoted type
Output signal	4-20Ma,Pluse	Power consumption	≤15W
Power supply	220V,24V,Battery	Protection level	IP65,IP68(need customized)
Explosion-proof grade	Ex II BT6 Gb	Electrical interface	M20X1.5
Display	Instantaneous flow, flow rate, percentage, air-to-tube ratio, positive, reverse accumulation, alarm display

LD Electromagnetic flowmeter model selection :

Diameter(mm)	Measuring range(m3/h)
	Small flow(m3/h)	Normal flow(m3/h)	Large Flow(m3/h)
10	0.028-0.25	0.3-1.6	2.0-3.39
15	0.06-0.6	0.8-3.0	4.0-7.6
20	0.06-0.6	1.2-5.0	6.0-13.6
25	0.18-1.6	2.0-8.0	10-21
32	0.29-2.5	3.0-12	16-35
40	0.45-4.0	5.0-20	25-45
50	0.7-6.0	8.0-40	50-85
65	1.19-10	12-60	80-143
80	1.81-16	20-120	160-217
100	2.83-25	30-160	200-339
125	4.42-40	50-250	300-530
150	6.36-60	80-400	500-763
200	11.3-100	120-600	800-1357
250	17.7-160	200-800	1000-2120
300	25.45-250	300-1200	1600-3054
350	34.6-300	400-1600	2000-4157
400	45.2-400	500-2000	2500-5429